University Of Michigan Operations And Supply Chain Management Assignment Help - Cost Planning

Question - Multiple Choice Questions
1. An example of a committed cost is:
A. employee training.
B. manufacturing supplies.
C. real estate taxes.
D. charitable contributions.
2. W hich of the following is not a strong reason for budgeting
A. Budgets provide a benchmark for judging performance.
B. Budgeting requires little effort by non-accounting managers.
C. Budgeting requires management to plan.
D. Budgeting requires coordination among the functional areas of the firm.
3. The budgeting process that most likely creates an attitude supportive of achieving organization
goals is:
A. top-down approach.
B. zero based approach.
C. proportionate increase approach.
D. participative approach.
4. A budgeting approach that implies little or ...Read More no input from lower levels of management is known as
the:
A. top-down approach.
B. zero based approach.
C. proportionate increase approach.
D. participative approach.

5. Budget slack is:
A. sometimes called padding or cushion.
B. the result of budget estimates submitted that are slightly higher than what the costs are really
expected to be.
C. an allowance for contingencies built into a budget.
D. all of the above.
6. Zero-based budgeting forces managers to:
A. identify and prioritize the activities that are carried out in their departments.
B. justify all of their expenditures for each budget period.
C. both A and B.
D. none of the above.
7. A budget that is prepared for several periods in the future, then revised several times prior to the
budget period is called a:
A. rolling budget.
B. zero-based budget.
C. discretionary budget.
D. single-period budget.
8. A budget that has been prepared only once prior to the budget period is called a:
A. continuous budget.
B. zero-based budget.
C. discretionary budget.
D. single-period budget.

9. A budgeting process that involves justifying resource requirements based on an analysis and
prioritization of organizational objectives is called:
A. continuous budgeting.
B. zero-based budgeting.
C. discretionary budgeting.
D. single-period budgeting.

10. ___________ budgets are generally more expensive to maintain than single-period budgets
because more time and effort is required in their preparation.
A. Zero-based
B. Continuous
C. Discretionary
D. Production
11. The key data element on which the entire budget is based is the:
A. sales/revenue forecast.
B. income statement budget.
C. cash budget.
D. balance sheet forecast.
12. The operating budget depends on key information developed in the:
A. cash forecast.
B. sales forecast.
C. labor forecast.
D. operating forecast.
13. The production budget uses all of the following except:
A. the sales forecast.
B. the inventory policy.
C. the cash receipts budget.
D. the beginning inventory quantity.
14. A materials purchases budget must be completed immediately after the preparation of the:
A. direct labor budget.
B. operating expense budget.
C. cash budget.
D. production budget.

15. Operating expenses are best budgeted on the basis of knowledge about:
A. cost behavior patterns.
B. relevant range.
C. prior period actual expenses.
D. current period budget amounts.
16. The cash budget is especially important to a firm when:
A. there is not a lot of confidence in the sales forecast.
B. it has a relatively large amount of operating cash.
C. the P/E ratio has been trending downwards.
D. it may have to negotiate a short-term bank loan.
17. Which of the following costs are included in the cost classification that is based on the relationship
between total cost and volume of activity

A. Variable cost and fixed cost.
B. Direct cost and indirect cost.
C. Product cost and period cost.
D. Committed cost and discretionary cost.
18. Which of the following costs are included in the cost classification that is based on the time frame
perspective
A. Variable cost and fixed cost.
B. Direct cost and indirect cost.
C. Product cost and period cost.
D. Committed cost and discretionary cost.
19. A cost that is incurred because of a long-range policy decision is known as a:
A. discretionary cost.
B. committed cost.
C. continuous cost.
D. standard cost.

20. Which of the following is not an important factor to consider when preparing a sales forecast
A. The state of the economy.
B. Seasonal demand variations.
C. A change in the management team.
D. Competitors' actions.
21. Which of the following is a plan for acquiring the resources needed to complete the manufacturing
activities that will satisfy the organization's sales forecast
A. Sales budget
B. Raw materials budget
C. Production budget
D. Direct labor budget
22. Which of the following lists the components of the master budget in correct chronological order
A. Direct labor budget, production budget, cost of goods sold budget.
B. Sales budget, production budget, cash budget.
C. Sales budget, raw materials budget, production budget.
D. Cash budget, production budget, manufacturing overhead budget.
23. The raw materials budgeted to be purchased for the period is equal to:
A. ending inventory + raw material used - beginning inventory.
B. ending inventory + ending inventory - raw material used.
C. beginning inventory - ending inventory + raw material used.
D. beginning inventory + raw material used - ending inventory.
24. The operating expense budget is based on the:
A. sales budget.
B. production budget.
C. manufacturing overhead budget.
D. cash budget.

25. Depreciation on the office equipment would appear in which of the following budgets
A. Production budget.
B. Manufacturing overhead budget.

C. Operating expense budget.
D. Cash budget.
26. Which of the following items would be included in the operating expense budget
A. Sales commissions.
B. Raw material purchases.
C. Cash receipts.
D. Cost of goods sold.
27. Which of the following would not appear in the operating expense budget
A. Sales commissions.
B. Delivery expense.
C. Advertising.
D. Depreciation on the production equipment.
28. What is the "key" to the entire operating budget
A. The forecast of operating activity.
B. The budgeted income statement.
C. The budgeted balance sheet.
D. The production/purchases budget.
29. Which of the following is the last budgeted financial statement to be prepared
A. Budgeted income statement.
B. Budgeted balance sheet.
C. Cash budget.
D. It doesn't matter which one is prepared last.

30. Which of the following lists the components of the master budget in correct chronological order
A. Cash budget, budgeted income statement, budgeted balance sheet.
B. Budgeted balance sheet, cash budget, budgeted income statement.
C. Budgeted income statement, cash budget, budgeted balance sheet.
D. It doesn't matter in which order they are prepared.
31. A cash budget would not include:
A. sale of common stock.
B. payment of dividends.
C. payment of property taxes.
D. plant and building depreciation.
32. A key to estimating an accurate amount of cash to be collected from sales is:
A. the accuracy of the sales forecast.
B. the accuracy of the estimated collection patterns for sales.
C. both A and B are keys.
D. neither A nor B are keys.
33. An important reason for imposing a minimum cash balance in the cash budget is:
A. it provides a cushion that can absorb forecast errors.
B. it provides extra funds for managers to spend.
C. it makes the balance sheet look better.
D. all of the above.
34. The development of the operating budget is complete when:
A. the sales forecast for next year is complete.
B. the budgeted cash flow statement is complete.

C. the budgeted income statement is complete.
D. the budgeted balance sheet is complete.

35. A standard cost or production standard that is achievable under actual operating conditions is
called a(n):
A. attainable standard.
B. ideal standard.
C. past experience standard.
D. average standard.
36. Standard costs are comprised of two elements:
A. the quantity of input and the cost per unit of input.
B. the quality of input and the cost per unit of input.
C. the quantity of input and the cost per unit of output.
D. the quality of input and the cost per unit of output.
37. ______________ standards allow inefficiencies from prior years to be incorporated into the
budget, thus providing little incentive for improvement.
A. Ideal
B. Engineered
C. Attainable
D. Past experience
38. A standard cost or production standard that assumes maximum operating conditions and 100%
efficiency at all times is called a(n):
A. attainable standard.
B. ideal standard.
C. past experience standard.
D. average standard.
39. Standard costs are used in which of the following phases of the management process
A. Planning
B. Control
C. Organizing
D. Both A and B

40. Fixed costs classified according to the time frame perspective are known as:
A. direct cost and indirect cost.
B. constant and inconsistent cost.
C. committed cost and discretionary cost.
D. product cost and period cost.
41. The concept of a standard used for planning and control purposes is most like a:
A. measure of ideal performance.
B. unit budget.
C. measure of maximum efficiency.
D. measure of historical performance.
42. Standards are most appropriately used to:
A. reward workers and managers who meet them.
B. penalize workers and managers who do not meet them.

C. calculate the unit cost of a product or service.
D. support the planning and control processes of the firm.
43. Standards are likely to be most useful when expressed in:
A. dollars per unit of input to the manufacturing process.
B. quantities per unit of output from the process being evaluated.
C. total costs for the accounting period for the department being evaluated.
D. terms easily related to by the individual whose performance is being evaluated.
44. Developing a standard cost for a product or service will usually involve:
A. efforts of cost accounting personnel only.
B. focusing only on variable costs.
C. the same kind of communication involved in the overall budgeting process.
D. concentrating on historical costs and performance levels.

45. Once standard costs for products or services have been developed:
A. they must be updated monthly to be useful.
B. they can be used for more than planning and control purposes.
C. they need not be revised unless the product or service is modified.
D. performance reports must be issued if the standards are to be useful.
46. The kind of standard that is most useful for planning and control is:
A. an attainable standard.
B. an ideal, or engineered, standard.
C. a negotiated standard.
D. a past experience standard.
47. Standard costing is developed and used for:
A. planning purposes.
B. control purposes.
C. product costing purposes.
D. all of the above.

Essay Questions

48. Breaded Oak, Inc. has a policy that requires 20 percent of the expected sales of its product to be
on hand at the end of the prior month. Forecasted sales, in units, for the months of January through
April are as follows:

(a.) Calculate the number of units planned for ending inventory for January, February, and March.
(b.) Calculate the number of units budgeted to be produced in January, February, and March.



49. Brenda, Inc. makes wooden tables. Each table requires 28 pounds of lumber to produce. The
sales forecast for March is 1,600 tables. Estimated beginning and desired ending inventories for
March are the following:

(a.) Calculate the number of tables to be produced in March.
(b.) Calculate the number of pounds of lumber to be purchased in March.

50. Aborkian Co. is forecasting sales of 75,000 units of product for November. To make one unit of
finished product, seven pounds of raw materials are required. Actual beginning and desired ending
inventories of raw materials and finished goods are:

(a.) Calculate the number of units of product to be produced during November.
(b.) Calculate the number of pounds of raw materials to be purchased during November.




51. Pacesetters, Inc., has actual sales for July and August and forecasted sales for September,
October, November, and December as follows:

(a.) The firm's policy is to have finished goods inventory on hand at the end of the month that is equal
to 70 percent of the next month's sales. It is currently estimated that there will be 4,200 units on hand
at the end of August. Calculate the number of units to be produced in each of the months of
September, October, and November.
(b.) Each unit of finished product requires 6.5 pounds of raw materials. The firm's policy is to have raw
material inventory on hand at the end of each month that is equal to 60 percent of the next month's
estimated usage. It is currently estimated that 26,000 pounds of raw materials will be on hand at the
end of August. Calculate the number of pounds of raw materials to be purchased in each of the
months of September and October.




52. Avery's Bicycle Shop, a retail store, has an average gross profit ratio of 28 percent. The sales
forecast for the next four months follows:

Management's inventory policy is to have ending inventory equal to 1.4 times the cost of sales for the
subsequent month, although it is estimated that the cost of inventory at March 31 will be $170,000.
Calculate the purchases budget, in dollars, for the months of April, May, and June.




53. Danzi, Inc., has budgeted sales for the month of July and estimated cost behavior patterns for a
number of its expense items listed below. From this information prepare an operating expense budget
for the month of July.

54. Remote Center's sales are all made on account. The firm's collection experience has been that 20
percent of a month's sales are collected in the month of sale, 60 percent are collected in the month
following the sale, and 18 percent are collected in the second month following the sale. The sales
forecast for the months of August through November is:

Calculate the cash collections that would be included in the cash budgets for October and November.



55. Dominic's, Inc. had actual sales for January and February and forecasted sales for March, April,
May and June as follows:

Based on company experience, it is estimated that 35 percent of a month's sales are collected in the
month of sale, 48 percent in the month following the sale, and 16 percent in the second month
following the sale.
Calculate the estimated cash collections for March, April, and May.




56. The following information for the month of May has been provided for the Bowser Company:

(a.) Prepare a cash budget for May.




57. Peachtree's Siding and Window Co. is a custom home improvement company. All sales are made
on account; 30 percent of a month's sales are collected in the month of sale, 60 percent are collected
in the month following the sale, and 8 percent are collected in the second month following the sale.
Cash on hand on October 1 is estimated to be $32,000.
Merchandise purchases and operating expenses are paid as follows:

Peachtree's Siding and W indow Co.'s income statement budget for each of the next three months is
as follows:

Prepare a cash budget for the month of October.




58. The monthly cash budgets for the first quarter of 2009 are shown below ($000 omitted) for XYZ
Company. A minimum cash balance of $40,000 is required. A line of credit has been established with
ABC's bank at a 7.5% interest rate. Calculate the missing amounts:

59. XYZ Company produces high quality widgets. Three raw materials are converted into the finished
product by two labor groups. Manufacturing overhead is applied to finished units based on direct labor
hours. The following standards have been established for each widget produced:

Manufacturing overhead $20.00/dhr
a) Calculate the standard cost of producing 400 high quality widgets.
1. ...Read Less

Solution Preview - No Solution Preview Available

Original Question Documents

N/A